Street Tote
A reversible and transformable tote that will make you actually want to carry a tote.
USD $325
Free global shipping
The Street Tote can be carried as a tote, slung as a satchel, or carried as an expedient backpack. It can also be packed flat or rolled up and stuffed into your Street Pack or Travel Duffel.
Need to change your style on the go? The Street Tote is reversible and transformable.
The Street Tote has two distinct personalities: technical or clean. The outside of the tote is black with technical features. The inside is grey, with no technical features. Both sides use UltraWeave 200X fabric.
Key Features
The Street Tote follows the design philosophy of the Street Series.
Discreet
Hard wearing
Lightweight
Weather resistant
Extensible
Packable
In addition, the Street Tote is:
Transformable
Reversible
Storage & Organisation
The tote has a large, 28 litre main compartment and a zipped pocket with an organisation panel.
On the black side, there are two elasticised side pockets suitable for a water bottle, compact umbrella, or anything else you might need to get to in a hurry.
Internal organisation panel
On one side of the tote, there's a zipped storage pocket. This pocket is accessible from the outside and the inside, allowing you to access the pocket when the tote is reversed. Inside the storage pocket is an organisation panel with a zip section and two pockets.
Carriage
The Street Tote can be carried as a tote. But there’s more to it than that.
Tote Mode
As you'd expect, the tote can be carried as... a tote. The two 25 mm UHMWPE straps are removeable and can be adjusted up and down the webbing daisy chain on the black side of the tote to change their height (there are seven height options). You could also attach these straps to the accessory tabs on the top of the bag for a slightly wider carry.
Satchel Mode
The tote can also be carried as a satchel, by attaching a 38 mm shoulder strap (not supplied) to the webbing loops on the front and back of the tote. There are snaps along the top of the tote that enable you to clip the top and sides of the bag together, allowing you to fold over the top when carrying the tote as a satchel. The tote is designed so you're able to access the storage pocket while carrying it as a satchel. If you open both zips, you can access the main storage area.
In a pinch, you could also carry the tote as a backpack. The detachable quick release shoulder straps from the Street Pack will fit the Street Tote.
Specifications
Dimensions: 44 cm (17.32 in) high x 36 cm (14.17 in) wide X 12 cm (4.72 in) deep
Weight: 345 grams (12.17 oz), including handles
Volume: 28 litres (985.46 fluid ounces)
Colour: Black on outside, grey on inside
Included accessories
2 x Removeable 25 mm x 580mm UHMWPE handles
Materials
We’ve made no compromises when it comes to materials.
Fabric
Inner and outer fabric: Challenge UltraWeave 200X
Internal and external elasticised pockets: Challenge UltraStretch
The Street Tote is made from two layers of Challenge UltraWeave 200X, sewn back-to-back to provide a completely reversible bag.
Webbing
Attachment points: 25 mm x 1.0 mm UHMWPE mil-spec 17337 weave
Accessory tabs: 25 mm x 0.6 mm UHMWPE plain weave webbing
Handles: 25 mm x 1.0 mm UHMWPE herringbone weave
Reinforcement: 38 mm x 0.6 mm UHMWPE webbing
Zips
Storage compartment: #5 YKK coil zip with matte PU coating and two locking sliders
Internal storage pocket: #5 YKK coil zip with one locking slider
The two zip sliders on the storage compartment accommodate left and right-handed people.
Components
Handle components: Acetal
Components are attached to the shoulder sling, not to the bag.
If you want to make your own handles or straps using other materials, you can simply attach your own straps to the tote.
Design & Materials
Learn more about our materials here.
Learn more about our design philosophy here.